dustrial apps. But, it can be a bit confusing on how you’re going to begin it. In this guide, you will know what things to perform to begin to start the Bauer compressors.
1. Inspect for damages
You must inspect the compressor to see if it has been damaged during transit prior to you can turn it on. If you discover any damaged, immediately contact the company.
2. Solid Flat Ground
If you’re using the system you must ensure it’s set on solid flat ground. You should avoid placing it on gravel or dirt as it could create issues.
3. Angles of tilt
The maximum tilt angle should be 5 degrees. So, prior to you start the Bauer compressors, you need be sure to follow the directions carefully.
4. Use Dipstick
This is the way to determine whether the oil level within your system is adequate. It’s similar like a car dipstick. When you pull it out, it shows the minimum and maximum markings.
5. Stay clear of spaces that are enclosed.
When you start Bauer compressors, they must not be run within enclosed areas. Also, the hopper’s LED needs to be mounted.
6. Hop Collide Cartridge
If the compressor is driven by an Petrol engine, this must be employed. ruim8e26qk.